Home / Pallets / Steel Reinforced Pallet
Steel Reinforced Pallet
The heaviest-duty board in the PAC® range — a composite pallet built around a 12mm steel tube frame, engineered for Multi Product Vibro machines producing solid blocks and RE blocks.
The Strongest Board in the PAC® Range
The PAC® Steel Reinforced Pallet is built for plants where weight and impact are the limiting factor — solid blocks, RE blocks and other dense fly ash or cement products that flex and crack lighter pallets over time. A 12mm steel tube frame (2.5-3mm wall thickness) runs through the same high-density plastic and alumina oxide composite used across the PAC® range, adding rigidity without sacrificing the water and termite resistance the boards are known for.
Every board is individually moulded to your Multi Product Vibro machine, so it sits flat under load and releases cleanly cycle after cycle. It carries the same 40% buyback replacement policy as the rest of the PAC® range, used by 4,000+ manufacturers across 200+ cities in India.
Technical Specification
What Goes Into the Board
The composite mix is built up first, then reinforced through its core with a steel tube frame for plants running the heaviest, most repetitive vibration cycles.
Frame
Embedded Steel Tube Frame
A 12mm diameter steel tube, 2.5 to 3mm wall thickness, runs through the core of the board — this is what separates the Steel Reinforced Pallet from the rest of the PAC® range and gives it the highest load-bearing capacity for solid and RE block production.
Why Plant Owners Switch to PAC®
Water Proof
UV Resistant
Highest Load Capacity
Easy to Clean
Does Not Bend or Deform
100% Recyclable
Termite & Fire Resistant
Longest Service Life in Range
Built For Multi Product Vibro Machines
Multi Product Vibro Machine
Used across multi-mould, high-tonnage vibro lines producing a range of fly ash and cement-based products in a single run — the steel-reinforced core keeps the board flat under the heaviest, most repetitive loads.
Fly Ash Bricks
Pavers
Hollow Blocks
Solid Blocks
RE Blocks
Other Fly Ash / Cement Products
Which PAC® Pallet Fits Your Machine?
| Pallet Type | Key Reinforcement | Thickness | Service Life | Best For |
|---|---|---|---|---|
| Fibre Reinforced | Cotton fibre + alumina oxide | 12, 18, 21 mm | 3 – 4 years | Top press hydro & vibrating table |
| Metal Reinforced | XLP metals + alumina oxide | 18, 21, 25 mm | 5 – 6 years | Imported Vibro & Hydro Vibro |
| Steel Reinforced | 12mm steel tube frame | 25, 30 mm | 7 – 8 years | Multi product vibro, solid & RE blocks |
India’s Largest Manufacturer of Composite Pallets
Common Questions About the Steel Reinforced Pallet
What makes this pallet different from the others?
It’s the only board in the PAC® range with an embedded 12mm steel tube frame (2.5-3mm wall thickness), on top of the standard 62% mixed plastic, 23% alumina oxide and 15% XLP metal composite — giving it the highest rigidity in the range.
How long does it last?
7 to 8 years under normal production use — the longest service life of any PAC® pallet — backed by Rajratan’s 40% buyback replacement policy.
Which machine should I use it with?
It’s built for Multi Product Vibro Machines, and is used for fly ash bricks, pavers, hollow blocks, solid blocks, RE blocks and other fly ash / cement based products.
What thickness should I order?
It’s available in 25mm and 30mm thickness. Share your machine type and mould size and we’ll mould the right fit — custom sizes are available on order.
Will it bend under heavy solid blocks?
No — the embedded steel tube frame is specifically there to resist the higher impact and weight loads of solid block and RE block production, where lighter pallets tend to bend or crack.
Get a Free Steel Reinforced Pallet Sample
Tell us your machine type and product mix — we’ll recommend the right thickness and mould it to fit.